klammertext/sks/table/table.k

# Table argument types and klammer declaration

@@@argtype index_subsets |
  one or more subsets in parentheses, attached to an index.  Each subset is a
  single index <n>, a closed range <n>-<m>, or an open range <n>- (from <n> to
  the end).  A negative index counts from the end (-1 is the last).  Several
  subsets are separated by commas, with no spaces.
  Example: (1-4,6-9)
  :pattern \((?^:-?\d+(?^:-(?^:-?\d+)?)?)(?^:,-?\d+(?^:-(?^:-?\d+)?)?)*\)
@@@

@@@argtype indexed_range |
  an index with optional subsets, written with no spaces.  The index part is a
  single index <i>, a closed index range <i>-<j>, or an open index range <i>-
  (from <i> to the last index).  It may be followed by parenthesized subsets
  (see the index_subsets type) restricting the extent in the other dimension.
  All indices are zero-origin.  A negative index counts from the end, as in
  Python: -1 is the last index, -2 the second to last.  Ranges are inclusive,
  so "1--2" is index 1 through the second-to-last index.  Examples:

    3            index 3, full extent
    2-5          indices 2 through 5, full extent
    3(1-4,6-9)   index 3, restricted to 1 through 4 and 6 through 9
    2-5(0-2)     indices 2 through 5, each restricted to 0 through 2
    -1           the last index
    1--2         index 1 through the second-to-last index

  :pattern -?\d+(?^:-(?^:-?\d+)?)?(?^:'index_subsets')?
@@@

@@@argtype column_width |
  width of the table columns.  Each column is one of 'fit' (widest line of the
  cells in that column), 'fill' (the remaining width of the table after the
  other columns, but no more than the column's widest line -- the table stops
  growing once nothing needs a line break), a fraction 0.0->1.0 (that
  fraction of the total table width), or '*' (the remaining width,
  unconditionally -- the table always spans the full width).  Several 'fill'
  columns divide the remaining width in proportion to their widest lines;
  'fill' cannot be combined with a fraction or '*'.  If there are fewer
  positions than columns in the table, the last value is repeated.  Extra
  positions generate a warning.
  :pattern (fill^|fit^|f^|0?\.\d+^|\*^|\s+)+
  :python_cast (lambda s : s.split())
  :default fit
@@@

@@@argtype cell_hpos |
  horizontal formatting in a table cell. One of 'l', 'c' or 'r' for each
  cell in a row. If there are fewer positions than cells in a row, the
  last value is repeated.  Extra positions generate a warning.
  :pattern (l^|c^|r^|\s+)+
  :python_cast (lambda s : s.split())
  :default l
@@@

@@@argtype table_hline |

  a table's horizontal lines, as one or more whitespace-separated items.
  With N rows there are N+1 horizontal boundaries, numbered 0 to N from the
  top; boundary i lies above row i, and boundary N is the bottom.  An item
  is either a boundary name or an indexed_range of boundary indices.  The
  names are 'top' (boundary 0), 'head' (boundary 1, under a header row),
  'bottom' (boundary N), 'inner' (all boundaries between top and bottom),
  'all' (every boundary), and 'none' (no lines).  A name or index may be
  followed by parenthesized subsets to draw only part of a line, given as
  zero-origin column ranges.  When ^:hline is given it replaces the default
  lines (with a header, 'head' and 'bottom'); ^:hline none removes them.
  Examples:

    top bottom     lines above and below the table
    head(1-)       a line under the header, from column 1 to the last
    3(1-4,6-9)     two partial lines at boundary 3
    all            every line
    none           no lines

  :pattern ((?^:top^|head^|inner^|bottom^|all^|none)(?^:'index_subsets')?^|'indexed_range'^|\s+)+
  :python_cast (lambda s : s.split())
  :alone all
@@@

@@@argtype table_vline |

  a table's vertical lines, as one or more whitespace-separated items.
  With M columns there are M+1 vertical boundaries, numbered 0 to M from
  the left; boundary i lies to the left of column i, and boundary M is the
  right edge.  An item is either a boundary name or an indexed_range of
  boundary indices.  The names are 'outer' (boundaries 0 and M), 'inner'
  (all boundaries between them), 'all' (every boundary), and 'none' (no
  lines).  A name or index may be followed by parenthesized subsets to
  draw only part of a line, given as zero-origin row ranges.  Examples:

    outer          lines at the left and right edges
    2(0-3)         a line left of column 2, spanning rows 0 through 3
    all            every line

  :pattern ((?^:outer^|inner^|all^|none)(?^:'index_subsets')?^|'indexed_range'^|\s+)+
  :python_cast (lambda s : s.split())
  :alone all
@@@

@@@argtype table_span |

  a list of cell spans, each an indexed_range whose index selects the row
  (for colspan) or the column (for rowspan), and whose parenthesized subset
  gives the zero-origin range of cells to merge.  An index range repeats
  the same span; several subsets make several spans.  Examples for colspan:

    1(2-4)         in row 1, merge columns 2 through 4
    1(0-1,3-5)     two merges in row 1
    2-4(0-1)       the same merge in rows 2 through 4

  :pattern ('indexed_range'^|\s+)+
  :python_cast (lambda s : s.split())
@@@

@@@argtype table_calc |

  calculations that fill table cells with computed values, separated by
  semicolons.  Each calculation has the form

    <target> = <operator> <operand> <operand> ...

  where the operator is one of + - * / and each operand is a cell selection
  or a number.  A cell selection is an indexed_range read as <rows>(<columns>);
  a range expands to all of its cells in row order, so "+ 1-2(3)" sums column 3
  of rows 1 and 2.  The SHAPE of the target chooses the operation: a single
  cell <row>(<column>) folds the operands to one value, while a target that
  ranges over rows (0-(2)) or columns (-1(0-)) runs the calculation once per
  row or column (a "map").  See notes/calc_notation.md for the map forms,
  relative operands, and broadcasting.  A plain number is a constant
  and always uses a period as its decimal mark.  Operators fold from the
  left ("- 1(0-2)" is a minus b minus c); with a single operand, - negates
  and / gives the reciprocal.  Calculations run in the order given, and each
  reads the values earlier calculations have written, as displayed.
  Negative indices count from the end (see indexed_range), which is handy
  when a total sits in the last row: "-1(5) = + 1--2(5)" writes into the
  last row of column 5 the sum of that column from row 1 through the row
  above it.  Example:

    1(3) = * 1(1-2) ;
    2(3) = * 2(1-2) ;
    3(3) = + 1-2(3)

  # Coarse structural check only -- "<target> = <op> <operand>..." groups
  # separated by ";" -- so that a malformed target or operand reaches
  # run_calc() in table.py, whose per-token validation gives a precise message
  # (e.g. an infix "* a * b" reports that "*" is not a number or a cell
  # selection) instead of this whole description being dumped.  A token is any
  # run of characters other than space, ";", or "=" ("^^" escapes the regex
  # class negation "[^...]" so the Klammertext "^" is not consumed).
  :pattern \s*([^^\s;=]+\s*=\s*[-+*/](\s+[^^\s;=]+)+\s*(;\s*^|\s*$))+

@@@

@@@argtype decimal_mark |
  the character used as the decimal mark in numeric cell values, either
  'period' (1,234.56) or 'comma' (1.234,56).  Governs both the reading of
  numbers from cells in table calculations and the formatting of
  calculated values.
  :pattern period^|comma
  :default period
  :alone comma
@@@

@@@argtype table_justify |
  cell justification overrides, as one or more  <cells> <position>  pairs
  separated by semicolons (the same list style as ^:calc).  <cells> is an
  indexed_range selecting cells; <position> is l, c, or r and overrides
  the column justification given by ^:cell_hpos for those cells.  A colspan
  anchor's override justifies the whole merged cell.  For example,
  "-3--1(3) r" right-justifies the cells in column 3 of the last three
  rows.
  # Coarse check ("<cells> <position>" pairs); justify_overrides() in
  # table.py validates the range and position.
  :pattern \s*([^^\s;]+\s+[lcr]\s*(;\s*^|\s*$))+
@@@

@@@argtype table_format |
  cell formatting, as one or more  <cells> <function>  pairs separated by
  semicolons (the same list style as :calc).  <cells> is an indexed_range
  selecting the cells to format; <function> is a <module>.<function> Python
  reference (the same form the eval klammer uses) to a function that takes the
  cell's value and the target and returns the formatted text.  The function
  lives in a module the writer supplies (a currency style is specific to a
  document, so the SKS ships none): for example, with a euro() function in
  your own module, "0-(5) myformats.euro" formats every cell of column 5 as a
  Euro amount.  Runs after :calc, so it formats computed values; a cell whose
  value is not a number is left unchanged, with a warning.
  # Coarse check ("<cells> <function>" pairs); apply_formats() in table.py
  # validates the range and calls the function.
  :pattern \s*([^^\s;]+\s+[^^\s;]+\s*(;\s*^|\s*$))+
@@@

@@rowcolor.k c : Change the color of a table row to color *c* @@
@@rowcolor.tex :: \colorrow{*s*} @@

@@table.k rows.rest(2)
  :id
  @caption_args :caption_side top @
  @hpos_args@
  :header.bool true
  :allow_break.bool false
  :column_width.column_width
  :hline.table_hline
  :vline.table_vline
  :grid.bool false
  :cell_hpos.cell_hpos
  :justify.table_justify
  :header_style.style_code i
  :style.style_code_list
  :colspan.table_span
  :rowspan.table_span
  :calc.table_calc
  :format.table_format
  :decimal.decimal_mark
  :leading.float 1.3
  :colsep 4pt
  :
A table of rows of cells.  The cells of a row are separated by "|" and the
rows by "||", so the argument is two-dimensional; the first row is the
header unless ^:header is false.

Everything else is optional, and a table written with no options is a plain
grid of its cells.  ^:column_width lays the columns out, ^:hline and ^:vline
draw lines, ^:colspan and ^:rowspan merge cells, ^:justify and ^:cell_hpos
place text within them, ^:calc computes cells from other cells and ^:format
formats them, and ^:hpos and ^:offset place the whole table in the text
column.
@@

@@table.html,tex,txt :: @eval table.Table(K) eval@ @@

@@tbl.k spec.figure_id : The caption title for a table @@
@@tbl.html,tex,txt :: @reference *spec* | Table @ @@